Trades & Services

If you love diagnosing, repairing, and maintaining a variety of vechiles, then Kathmandu Automotive is looking for Motor Mechanic roles. The role is suitable for someone with preivous experience and looking for a full time opportunity in repairing, maintaining and test motor vehicles and related mechanical components. <h3>Benefits</h3><ul><li>Competitive annual salary of $75,000 – $85,000 + Super</li><li>Supportive and dynamic work environment</li><li>Ongoing training and development opportunities</li><li>Job security with a growing and reputable business</li></ul> <h3>Task & responsibilities</h3><ul><li>Identify and diagnose mechanical faults in engines and related components.</li><li>Disassemble and remove engine assemblies, transmissions, steering systems, and other vehicle parts for inspection.</li><li>Repair or replace worn and defective components, following technical manuals as needed during reassembly.</li><li>Carry out routine maintenance tasks such as oil changes, lubrication, and engine tune-ups to enhance vehicle performance and meet environmental standards.</li><li>Reassemble engines and related parts after completing repairs.</li><li>Test and fine-tune mechanical systems post-repair to ensure optimal performance.</li><li>Inspect vehicles and, where authorised, issue roadworthy certificates or outline required repairs to meet roadworthiness standards.</li><li>Use computerised diagnostic tools to assess the condition and functionality of vehicle systems.</li><li>Assisting with ordering spare parts according to work required</li><li>Follow Safety procedures at all times</li><li>Advise customers on work performed, general vehicle conditions and future repair requirements</li></ul> <h3>Qualification & experience</h3><ul><li>Relevant or equivalent qualification in Light Vehicle Mechanical Technology.</li><li>Minimum 1-2 years of relevant experience preferred.</li><li>Strong diagnostic and repair skills</li><li>Ability to read and follow technical manuals</li><li>Australian driver’s licence</li></ul>

Annual

If you love diagnosing, repairing, and maintaining a variety of vechiles, then Kathmandu Automotive is looking for Motor Mechanic roles.

Motor Mechanic

Full time

SK SORATHIYA is a trusted name in the automotive repair industry. We are redefining car care with a full range of servicing, repairs, and tyre solutions tailored to keep your vehicle running smarter, smoother, and safer. Whether it’s routine maintenance like logbook servicing, oil changes, or pre-purchase inspections, and suspensions, or expert tyres fitting, wheel alignments, and puncture repairs, we’ve got you covered.We are seeking an experienced Motor Mechanic with a passion for automotive care with a positive attitude and willingness to learn new skills. You will be responsible for the diagnosis, repair and maintenance of a large variety of motor vehicles, ensuring the highest standards and customer satisfaction.Excellent opportunity to develop your career and expand your qualifications whist receiving an excellent salary.&nbsp; <h3>Benefits</h3><ul><li style="text-align:justify;">Competitive Salary: AUD 80,000–85,000 per annum&nbsp;</li><li style="text-align:justify;">Professional Development: Opportunities to work with a skilled team and access to training for staying updated with industry trends.</li><li style="text-align:justify;">A Supportive Work Environment: Be part of a team that values expertise, safety, and customer satisfaction.</li><li style="text-align:justify;">Diverse Range of Work: Gain experience across a wide array of vehicle services, from injector servicing to heavy vehicle inspections.</li></ul> <h3>Task & responsibilities</h3><ul style="list-style-type:disc;"><li style="text-align:justify;">Fault Detection and Diagnosis: Detecting and diagnosing faults in engines and vehicle parts using advanced diagnostic tools and techniques.</li></ul><ul><li style="text-align:justify;">Component Maintenance: Dismantling and removing engine assemblies, transmissions, steering mechanisms, and other components, inspecting parts for wear and damage, and checking functionality.</li><li style="text-align:justify;">Repairs and Replacements: Repairing or replacing worn or defective parts, reassembling mechanical components, and ensuring adherence to manufacturer guidelines.</li><li style="text-align:justify;">Routine Maintenance Services: Conducting oil changes, engine tune-ups, lubrications, and other scheduled maintenance tasks to optimize vehicle performance and ensure compliance with pollution regulations.</li><li style="text-align:justify;">Engine and Component Reassembly: Reassembling engines and components after repair, ensuring proper installation and alignment.</li><li style="text-align:justify;">Performance Testing and Adjustments: Testing and adjusting mechanical systems post-repair to guarantee optimal performance.</li><li style="text-align:justify;">Computer-Assisted Diagnostics: Using computerized equipment to diagnose, test, and analyze vehicle performance issues.</li><li style="text-align:justify;">Vehicle Inspections and Certification: Inspecting vehicles to issue roadworthiness certificates or outlining necessary repairs for roadworthiness compliance.</li><li style="text-align:justify;">Compliance with Safety Standards: Ensuring all tasks meet occupational safety regulations and manufacturer standards.</li></ul> <h3>Qualification & experience</h3><ul style="list-style-type:disc;"><li style="text-align:justify;">Certificate III in light vehicle mechanical Technology, Certficate IV in Automotive Mechanical Diagnosis&nbsp;</li><li style="text-align:justify;">At least Three to fours years of relevant experience in the automotive repair industry</li><li style="text-align:justify;">Licensing or registration (where required) to practice as a motor mechanic in Australia.</li><li style="text-align:justify;">Strong diagnostic and problem-solving skills.</li><li style="text-align:justify;">Ability to work independently while maintaining a commitment to team collaboration and customer satisfaction.</li><li style="text-align:justify;">A passion for the automotive industry and dedication to delivering high-quality repairs and maintenance services.</li></ul>

Looking for qualified and experienced Motor Mechanic

This position is suited to a mechanically skilled professional with a strong interest in 4x4 vehicles, off-road performance, and vehicle customisation. The role involves performing a broad range of diagnostic, maintenance, repair, and modification tasks in line with industry standards. <h3>Benefits</h3>Competitive salary package aligned with experience&nbsp;Opportunity to work on specialised 4x4 builds and custom projects&nbsp;Supportive, skilled, and passionate team environment&nbsp;Career development opportunities within a growing automotive business&nbsp;Exposure to a diverse range of vehicles and advanced aftermarket systems&nbsp; <h3>Task & responsibilities</h3>In this role, you will be required to:Diagnose mechanical and electrical faults in light vehicles and 4x4 systems using appropriate diagnostic equipment and technical manuals&nbsp;Carry out repairs and maintenance on engines, transmissions, suspension, steering, braking systems, and driveline components&nbsp;Perform scheduled servicing in accordance with manufacturer specifications, including oil changes, fluid checks, and component inspections&nbsp;Dismantle, repair, and reassemble vehicle components, ensuring all parts are tested and functioning correctly&nbsp;Inspect vehicles and identify worn or defective parts, recommending appropriate repairs or replacements&nbsp;Install, test, and maintain 4x4 accessories and modifications, including but not limited to:&nbsp;Suspension upgrades (lift kits, shock absorbers)&nbsp;Bull bars, winches, roof racks, and underbody protection&nbsp;Dual battery systems and auxiliary electrical setups&nbsp;Conduct electrical installations and fault-finding, including wiring, lighting systems, and aftermarket accessories&nbsp;Perform full 4x4 vehicle fit-outs, ensuring integration between mechanical and electrical components&nbsp;Ensure all work complies with safety standards and manufacturer guidelines, including relevant Australian Design Rules (ADR) where applicable&nbsp;Maintain accurate service records and job documentation&nbsp;Communicate with team members and customers regarding repair requirements and timelines&nbsp;&nbsp; <h3>Qualification & experience</h3>Minimum 1 year of relevant work experience as a Motor Mechanic (2–3+ years highly desirable)&nbsp;Relevant qualification in Automotive Mechanical Technology (or equivalent)&nbsp;Demonstrated ability to perform diagnostics, repairs, and servicing across a range of vehicle systems&nbsp;Experience or strong interest in 4x4 vehicles and aftermarket modifications (highly regarded)&nbsp;Sound knowledge of vehicle mechanical and electrical systems&nbsp;Strong problem-solving skills and attention to detail&nbsp;Ability to work independently and collaboratively within a team environment&nbsp;Commitment to workplace safety and high-quality workmanship&nbsp;&nbsp;

Which of the following statements best describes your right to work in Australia?

How many years’ experience do you have relevant to the advertised position?

OZ Canopies & 4X4 is seeking a qualified and motivated Full-Time Motor Mechanic to join our team in South Windsor, NSW.

Full-Time Motor Mechanic

As a Motor Mechanic at East Maitland Body Repairs, you will be responsible for diagnosing, repairing, and maintaining a wide range of vehicles. This role requires strong technical expertise, attention to detail, and the ability to work efficiently in a busy workshop environment. The successful candidate will play a key role in ensuring vehicles are repaired to a high standard and returned to customers in a safe and roadworthy condition.<hr>Key Responsibilities:<ul><li>Identify and diagnose mechanical and engine faults using appropriate diagnostic equipment and testing procedures.&nbsp;</li><li>Remove and dismantle engines, transmissions, steering assemblies, and other vehicle components for inspection and repair.&nbsp;</li><li>Examine mechanical parts to assess condition, identify defects, and determine required repairs or replacements.&nbsp;</li><li>Repair or replace worn, damaged, or defective components and reassemble mechanical systems in line with manufacturer specifications.&nbsp;</li><li>Carry out scheduled servicing and preventative maintenance, including oil changes, lubrication, and engine tuning to ensure efficient vehicle performance and compliance with environmental standards.&nbsp;</li><li>Reassemble engines and mechanical components following repair, ensuring accuracy, alignment, and proper installation.&nbsp;</li><li>Test, adjust, and fine-tune mechanical systems and components to ensure optimal performance and safety.&nbsp;</li><li>Utilise computerised diagnostic systems and scanning tools to detect faults, analyse data, and support repair decisions.&nbsp;</li><li>Inspect vehicles to assess overall condition and determine work required to meet roadworthiness and safety standards.&nbsp;</li><li>Maintain accurate service records, including details of inspections, repairs, and parts used.&nbsp;</li><li>Provide technical advice and recommendations to customers regarding vehicle condition, required repairs, and ongoing maintenance.&nbsp;</li><li>Ensure all work is completed in accordance with workplace health and safety standards and industry best practices.</li></ul>Qualifications and Requirements:<ul><li>Minimum of one year of experience as a Motor Mechanic.</li><li>Certificate III in Automotive Mechanical Technology (Light Vehicle) or equivalent qualification.&nbsp;</li><li>Strong knowledge of vehicle diagnostics, repairs, and maintenance procedures.&nbsp;</li><li>Ability to use diagnostic equipment, tools, and automotive software effectively.&nbsp;</li><li>Strong problem-solving skills and attention to detail.&nbsp;</li><li>Ability to work independently and as part of a team.&nbsp;</li><li>Valid driver’s licence preferred.&nbsp;</li></ul><hr>Benefits:<ul><li>Competitive salary package of $76,515 – $80,000 per annum + 12% superannuation.&nbsp;</li><li>Opportunity to work with a reputable and growing automotive business.&nbsp;</li><li>Supportive team environment with ongoing training opportunities.&nbsp;</li><li>Stable, full-time permanent employment.&nbsp;</li><li>Opportunity for career growth within the company.&nbsp;</li></ul>

Exciting opportunity for an experienced Motor Mechanic to join a dynamic team in a well-established workshop.

Motor Mechanic (General)

Automotive Trimmer / Vehicle Interiors &amp; Tint SpecialistEmployer: Mobile Windscreens &amp; Tinting Pty LtdLocation: Warwick Farm, NSW and mobile sydneyHours: Full-time, 38 hours per weekSalary: $77,000 – $85,000 + super&nbsp;Mobile Windscreens &amp; Tinting Pty Ltd is seeking an experienced Automotive Trimmer - upholstery to join our growing team. The position involves fabricating, fitting, and restoring vehicle interiors — including upholstery, roof linings, and interior trims — along with tinting and glass film application as part of our complete automotive restoration and finishing services.&nbsp;This role suits a tradesperson experienced in auto upholstery, interior fit-out, and film application, capable of delivering high-quality workmanship in a busy professional workshop <h3>Benefits</h3>What We Offer<ul><li>Secure full-time role with competitive pay and superannuation.</li><li>Professional, air-conditioned workshop with quality tools and materials.</li><li>A friendly, supportive team environment with opportunities to develop specialised skills.</li></ul> <h3>Task & responsibilities</h3>Key Duties and Responsibilities Automotive Trimmer - upholsteryPrimary Automotive Trimming Duties:<ul><li>Fabricate, install, and repair vehicle interior trim, including seats, door cards, carpets, consoles, and roof linings.</li><li>Measure, pattern, cut, and stitch leather, vinyl, and fabric materials using industrial sewing equipment.</li><li>Restore and replace seat foam, padding, and springs for comfort and aesthetics.</li><li>Apply adhesives, foams, and insulation to panels and frames for sound and heat protection.</li><li>Remove and refit interior components during re-trim and tinting work, ensuring precision and quality finish.</li><li>Conduct final fit and quality inspections to ensure alignment with manufacturer or customer specifications.</li><li>Fit and seal vehicle windows and sunroofs as part of interior restoration, ensuring correct alignment and finish.</li><li>Apply automotive tint and protective films to glass surfaces; cut to pattern, apply, and finish to high optical standards</li><li>Fit glass windows and trim</li></ul>Tinting &amp; Minor Glass-Related Work<ul><li>Apply and replace window films, tints, and protective coatings using precise patterning and application methods.</li><li>Fit and seal vehicle windows and sunroofs as part of restoration and trim projects (non-structural work only).</li><li>Measure and cut materials (glass or acrylic) for vehicle interior finishing tasks where required.</li></ul>Workshop &amp; Safety Responsibilities:<ul><li>Maintain all trimming and tinting tools/equipment (sewing machines, foam cutters, heat guns, adhesive sprayers).</li><li>Comply with workshop safety standards, PPE requirements, and environmental controls.</li><li>Maintain accurate records of materials used and jobs completed.</li></ul>&nbsp; <h3>Qualification & experience</h3>Skills &amp; Experience Required<ul><li>A certificate III minimum in the field with 2 years experience or a Minimum 3 years’ recent experience as an Automotive Trimmer, Vehicle Upholsterer, or related trade.</li><li>Strong experience in fitting, roof-lining, upholstery, and trim &amp; tint restoration for cars or light commercial vehicles.</li><li>Proficiency with industrial sewing, adhesives, foams, and pattern fabrication.</li><li>Competence in tint film application and familiarity with vehicle interior-glass integration.</li><li>Certificate III in Automotive Trimming Technology or equivalent practical experience preferred.</li><li>Current manual driver’s licence and ability to work independently and in a team environment.</li></ul>

Mobile Windscreens & Tinting Pty Ltd is seeking an experienced Automotive Trimmer to join our growing team. The position involves fabricating, fitting

Automotive Trimmer / Vehicle Interiors & Tint Specialist

Responsibilties:&nbsp;Your main duties include:<ul><li>Use tools to find electrical problems in vehicles</li><li>Remove and fix faulty electrical parts</li><li>Install new electrical parts in cars</li><li>Connect lights, alarms, and other accessories to power</li><li>Check and adjust engine control systems</li><li>Test and replace parts like alternators, starter motors, and batteries</li><li>Repair or replace damaged wiring and ignition systems</li><li>Replace small parts such as fuses, lights, and switches</li></ul>Requirements:To apply for this job, you should have:<ul><li>A relevant qualification (Certificate III in Automotive Electrical Technology or similar)</li><li>At least 1 year of practical experience working with vehicle electrical systems</li><li>Basic knowledge of wiring, batteries, alternators, starters, and vehicle electronics</li><li>Ability to use tools and equipment to find and fix faults</li><li>Good problem-solving skills</li><li>Ability to work alone and also in a team</li><li>Understanding of safety rules at work</li><li>Valid driver’s licence (preferred)</li><li>Good communication skills and a positive attitude</li></ul>Benefits:Working with CAR MASTER AUTO PTY LTD offers:<ul><li>Good salary based on your skills and experience</li><li>Full-time job with stable working hours</li><li>Training and support to improve your skills</li><li>Friendly and supportive team environment</li></ul>

Join CAR MASTER AUTO PTY LTD as an Automotive Electrician. Build skills, work with modern tools, and grow your career in a supportive team.

Automotive Electrician

About the Role &nbsp;As an experienced Joiner, you’ll play a key role in delivering high-quality, custom timber products. Your responsibilities will include:&nbsp;Creating solid timber components to specification&nbsp;Constructing and assembling components with precision&nbsp;Collaborating with a skilled and passionate team to produce exceptional results&nbsp;Operating workshop machinery and maintaining a safe, clean workspace&nbsp;Contributing to the innovation and quality of our product range&nbsp;Providing supervision and training to apprentices&nbsp;About You &nbsp;You have experience in hard wood joinery, (e.g. architectural door, window or staircase constructions)&nbsp;You’re passionate about all things woodworking related&nbsp;You’re organised, detail-oriented, and take pride in your craftsmanship&nbsp;You have strong interpersonal skills and a great attitude&nbsp;You have a Certificate III in joinery&nbsp;What We Offer &nbsp;A full-time position with an above-award hourly rate&nbsp;Support for further training and development&nbsp;Work on a wide variety of amazing high-end projects from start to finish: custom furniture, hospitality fit-outs, privacy screens, architectural windows and doors and many others.&nbsp;The chance to learn advanced techniques, including 5-Axis CNC machine operation and Programming&nbsp;Career progression in a dynamic, expanding business&nbsp;&nbsp;If you are interested in this role, please apply now including your resume and cover letter.&nbsp;Applicants must have Australian working rights to apply for this position.&nbsp;We look forward to hearing from you!&nbsp;

We are seeking an experienced Joiner to join our specialised team, creating custom high-end joinery and furniture.

Joiner

The successful candidate will be responsible for performing high-quality carpentry and joinery work across various construction and refurbishment projects, ensuring client specifications are met with precision and professionalism.Benefits:Competitive Salary:&nbsp;Attractive remuneration package ranging from AUD 75,000 to 85,000 per annum, based on experience and skill level.&nbsp;&nbsp;Opportunities for Career Development:&nbsp;Ongoing training and opportunities to enhance your skills in carpentry and joinery.&nbsp;Supportive Team Environment: Work alongside a skilled and experienced team that values collaboration and professionalismTasks and Responsibilities:&nbsp;<ul><li>Carry out relevant trade duties on responsive &amp; planned works as requested to Client Specifications.&nbsp;</li><li>Studies drawings and specifications to determine materials required to each project&nbsp;</li><li>Cuts materials such as timber and assemble or nail cut and other shaped parts for desired fit out&nbsp;</li><li>Assemble prepared wood to form structures and fittings ready to install&nbsp;</li><li>Installing building structures, doors, cupboards, skirtings and fittings ready to install&nbsp;</li><li>Ensure accuracy of work by checking completed projects with tools such as levels, surveying, equipment, or framing squares.&nbsp;</li><li>Build window frames, doors, staircases, and frame buildings by using raw materials or pre constructed items&nbsp;</li><li>Undertake repairs to existing fittings as per clients’ requirements&nbsp;</li><li>Plan and execute work with proper tools and materials to maximize productivity.&nbsp;</li><li>Follow Health and Safety policy and procedures including the wearing of personal protective equipment when necessary&nbsp;</li><li>Initiate ideas and suggest improvements throughout all areas of the business</li></ul>&nbsp;Qualifications &amp; experience<ul><li>Minimum 2 years’ experience as a carpenter and joiner.&nbsp;</li><li>Ability to interpret technical drawings and specifications accurately.&nbsp;</li><li>Proficiency in using carpentry tools and equipment. Strong attention to detail and quality workmanship.&nbsp;</li><li>Knowledge of health and safety standards and ability to adhere to them.&nbsp;</li><li>Good communication skills and ability to work both independently and as part of a team.&nbsp;</li><li>Trade qualification in Carpentry and/or Joinery preferred.</li></ul>

SMA Labour Hire PTY LTD (67 611 755 876) is seeking a skilled and motivated Carpenter/Joiner to join our growing team.

Carpenter/Joiner

<h3>Key Accountabilities</h3><ul><li>Work autonomously under supervision of licensed electrician to perform all trade and non-trade related works in all aspects of electrical services for the construction industry.</li><li>Complete assigned tasks and duties efficiently and effectively to meet the priorities and deadlines, and the quality and specification requirements.</li><li>Adhere to all FIP policies and procedures, including WHS requirements and the Code of Conduct.</li></ul><h3>Key Abilities</h3><ul><li>Complete all works, including light, power, communications and data, compliant with WHS and quality requirements, client's specifications and Australian standards.</li><li>Maintain all tools and equipment in a good working condition.</li><li>Follow wiring plans and diagrams to install electrical wiring, equipment and fixtures to comply with job specifications, standards and marketed up ‘as built’ drawings.</li><li>Under supervision install cable containment systems, rough-in and fit-off wiring, prepare switchboards and control panels to specifications and standards.</li><li>Safely use PPE, ladders, scaffolds, and EWP''s to install, maintain or repair electrical wiring, equipment and fixtures.</li><li>Inspect electrical systems, equipment, and components to identify hazards, use instruments to test and commission electrical systems, determine problems and offer solutions.</li><li>Follow all safety procedures, Safe Work Method Statements (SWMS) and PPE are appropriate from the tasks and used in a correct manner.</li></ul><h3>Qualifications</h3><ul><li>General Constructions Induction Card - White Card (Essential)</li><li>Completion of an Electrical Craftsman's Certificate or equivalent (Essential)</li><li>Scissor Lift Certificate/Yellow Card (Desirable)</li><li>First Aid Certificate (Desirable)</li><li>Low Voltage Rescue Training (Desirable)&nbsp;</li></ul>

Join a diverse team delivering electrical solutions to create a positive impact on the local environment.

Electrical Worker

We are looking for an experienced sheetmetal trades worker with proven experience in air conditioning ducting work. Our team is a highlyexperienced bunch of metal workers, mechanical and air-conditioning mechanics, and project managers. We undertake medium and largescale commercial projects <h3>Benefits</h3>Attractive salary [$75,000 - $85,000 depending on experience], interesting commercial projects, communicative team, room for growth. <h3>Task & responsibilities</h3>Calculating, Measuring, Marking, Cutting, Shaping, joining and Forming Sheetmetal for commercial and residential ducting.Fitting and installing ducting on location.Command over sheet metal tools - include aviation snips, hand seamers, duct crimpers, and duct notchers and drills.Working off Plans and Adhering to specifications <h3>Qualification & experience</h3>Minimum 1 year of experience in sheet metal ducting workCertificate III or Apprenticeship Desirable

Experienced Sheetmetal Trades Workers with ducting experience wanted.

Sheetmetal Trades Worker

Automotive Trades

Looking to solve your labour shortage? Promote your job opportunities to both domestic and international talent with MigratetoNewSouthWales and fast track your recruitment efforts today!

Connect with thousands of candidates in both Australia and overseas.

We are your direct line to a wider domestic and international job-seeker market. We’re dedicated to making the hiring process for employers more seamless, offering a suite of carefully designed features to help you improve your recruitment marketing, streamline your labour market testing processes and overcome your labour shortage challenges.

Simply upload your resume and our technology will register you to the platform, auto populate your profile and serve you job matches that are relevant to your skills and preferences.

services

580 available jobs

Motor Mechanic

Motor Mechanic

Full-Time Motor Mechanic

Motor Mechanic (General)

Automotive Trimmer / Vehicle Interiors & Tint Specialist

Automotive Electrician

Joiner

Carpenter/Joiner

Electrical Worker

Sheetmetal Trades Worker